SH900PLC-SET - Digital busbar machining center with automatic angle correction (re-bending function)
ERKO · ERKO-SH900-SET
€37,230.00*
% €43,800.00* (15% saved)Available, delivery time: 3-4 weeks
Product number: ERKO-SH900-SET
Product information "SH900PLC-SET - Digital busbar machining center with automatic angle correction (re-bending function)"
- This work stand is used for cutting, punching, bending and depositing CU and AL rails
- Max. Rail cross-section: 12x125 mm
- Bending angle range: 0°-90
- Equipped with a control unit and LED display in German or English
- Electronic angle sensor (accuracy 1°)
- Built-in ruler with graduated scale (accuracy 0.1 mm)
- Height adjustment of the hole punch (accuracy 0.1 mm)
- Burr-free round and oval perforation
- Smooth and clean cut, without burrs
- Built-in hydraulic drive (400 Volt) Foot pedal control (24 volts)
- Automatic detection of built-in accessories
- Bending angle correction - compensates for the back bending/spring effect of the material
- Electronic length measurement up to 6m
- Electronic measurement of the bend and perforation
- Repeatable setting of rails
- Additional working plate
- Rotatable touchscreen housing
- Connection for additional hydraulic tool
- Working pressure: 630 bar
- Dimensions: 1,400 x 930 x 1,420 mm
- Drive: 400 volt / 1.4 kW electro-hydraulic unit
- Scope of delivery:
- SH-900 - Processing station
- SH-408 - Support foot
- SH-403-8,5 Round punch D=8,5mm
- SH-403-11,0 Round perforator D=11,0mm
- SH-403-13,0 Round punch D=13,0mm
- SH-403-17,0 Round punch D=17,0mm
- SH-403-21,0 Round punch D=21,0mm
- SH-404-8,5x12mm Oval punch 8,5x12mm
- SH-404-11x16mm Oval punch 11x16mm
- SH-404-13x18mm Oval punch 13x18mm
- SH-404-17x21mm Oval punch 17x21mm
Properties from "SH900PLC-SET - Digital busbar machining center with automatic angle correction (re-bending function)"
Controlling: | foot-actuated |
---|---|
Cutting material: | Flat material |
Drive: | 400 volt electric motor, Hydraulic connection, single-acting |
Material of the cable: | Aluminum, Copper |
Maximum Diameter: | 21 mm |
Maximum material thickness: | 12 mm |
Working pressure: | max. 630 bar / 9.137 PSI |